Payment & Shipping Terms:
|Type:||Welded Mesh||Material:||Hot-Dipped Galvanized Wire, Low-Carbon Iron Wire|
|Hole Shape:||Square, Rectangular||Wire Gauge:||4.0mm Or According To Specific Require|
|Application:||Gabions, Fence, Retaining Wall, Shore Protection, Garden||Aperture:||50×50mm, 75×75mm, 50×100mm|
|Gabion Box Size:||1m×0.3m×0.3m, 1m×0.3m×0.5m, 1m×0.3m×0.8m, 1m×0.3m×1m, 1.5m×0.3m×1m, 2m×0.3m×1m||Packing:||Carton, Iron Pallet, Wooden Pallet|
welded gabion box,
river control gabion basket
Welded Gabion Baskets Stone Cage Aperture 5cm×10cm Size 1m×0.8m×0.3m
About Welded Gabion Baskets:
This durable, weather-resistant welded gabion basket made of hot dipped galvanised wire captivates with its filigree design as well as its wide range of applications. Filled with stones or similar materials and combined with other gabion baskets these wire constructs are ideal to be used as garden walls, noise barriers or for counteracting erosion as riverbank protection. These wire mesh cages can be further used as decorative garden elements, such as raised beds or seatings.
|Specification of Welded Gabion Basket|
|Material||Mesh Wire dia.||Helical Wire dia.||Aperture||Dimension|
Hot dipped galvanized wire
|All the specification could be customized|
Surface treatment of the Welded Gabion basket:
Aperture of the Welded Gabion
*Normally each gabion basket include 6-7pcs welded panels(contains diaphragms), 12-16pcs helical binders wire and 2-4pcs corner stiffeners(can be replaced by bracing wire).
Steps of Welded Gabion Installation:
Step 1, Let two adjacent gabion panels be perpendicular to the ground, and the two sides should be at a 90 degrees angle as below picture. Prepare the helical wire to align with the panels joint, and adjust the angle to make the helical wire falls by itself.
Step 2, Move the connected panels to the bottom panel, align to the joints, insert the right helical wire. Or install the surrounding mesh panels first, then assemble the bottom. Could turn over the connected panels direction, so the helical wire will be falls by it's own weight.
Step 3, Continue to install the side panel, because the weight of mesh panels is increased at this time, it is not suitable for one person to move, so flip the cage 90 degrees and manually thread the helical wire.
Step 4, Install the diaphragm, prepare the right helical wire according to the diaphragm edge length. Could turned 90 degrees of the bottom, then insert the helical wire by hand. The vertical part directly thread the helical wire.
Step 5, Installed the last side panels.
Step 6, Put the gabion stiffener / bracing wire to the right point(the example case is too small and don't need the stiffener).
Step 7, Put kinds of stones or other decorative material in to the basket. To ensure the basket flat and beautiful, it is required to installed parallel reinforcement bars outside of the cage. Then installed the lid at last.
Step 8, The installation is complete.
Features of Welded Gabions:
Welded Gabion Basket Application:
Packing and container loading: Each unit put into a poly bag then packed with corrugated carton
Contact Person: Gary
Tel: +86 15131897040